Import Component Definitions

This example shows how to import component definitions. It includes

• Download an example board

• Create a config file with component RLC and solder ball information

• Apply the config file to the example board

Import the required packages

import json
from pathlib import Path
import tempfile

from IPython.display import display
from ansys.aedt.core.downloads import download_file
import pandas as pd

from pyedb import Edb

AEDT_VERSION = "2024.2"

Download the example PCB data.

temp_folder = tempfile.TemporaryDirectory(suffix=".ansys").name
file_edb = download_file(source="edb/ANSYS-HSD_V1.aedb", destination=temp_folder)

Load example layout.

edbapp = Edb(file_edb, edbversion=AEDT_VERSION)

PyAEDT INFO: Logger is initialized in EDB.
PyAEDT INFO: legacy v0.29.0
PyAEDT INFO: Python version 3.10.11 (tags/v3.10.11:7d4cc5a, Apr  5 2023, 00:38:17) [MSC v.1929 64 bit (AMD64)]
PyAEDT INFO: Database ANSYS-HSD_V1.aedb Opened in 2024.2
PyAEDT INFO: Cell main Opened
PyAEDT INFO: Builder was initialized.
PyAEDT INFO: EDB initialized.

Create a config file with component information

Keywords

• reference_designator. Reference designator of the component.

• part_type. Part type of the component. Supported types are ‘resistor’, ‘inductor’, ‘capacitor’, ‘ic’, ‘io’, ‘other’.

• enabled. Only available for RLC components.

• solder_ball_properties.

  • shape. Supported types are ‘cylinder’, ‘spheroid’, ‘none’.

  • diameter.

  • mid_diameter.

  • height.

• port_properties.

  • reference_offset.

  • reference_size_auto.

  • reference_size_x.

  • reference_size_y.

• pin_pair_model. RLC network. Multiple pin pairs are supported.

  • first_pin. First pin of the pin pair.

  • second_pin. Second pin of the pin pair.

  • is_parallel.

  • resistance.

  • resistance_enabled.

  • inductance.

  • inductance_enabled.

  • capacitance.

  • capacitance_enabled.

cfg = dict()
cfg["components"] = [
    {
        "reference_designator": "U1",
        "part_type": "io",
        "solder_ball_properties": {
            "shape": "spheroid",
            "diameter": "244um",
            "mid_diameter": "400um",
            "height": "300um",
        },
        "port_properties": {
            "reference_offset": "0.1mm",
            "reference_size_auto": True,
            "reference_size_x": 0,
            "reference_size_y": 0,
        },
    },
    {
        "reference_designator": "C375",
        "enabled": False,
        "pin_pair_model": [
            {
                "first_pin": "1",
                "second_pin": "2",
                "is_parallel": False,
                "resistance": "10ohm",
                "resistance_enabled": True,
                "inductance": "1nH",
                "inductance_enabled": False,
                "capacitance": "10nF",
                "capacitance_enabled": True,
            }
        ],
    },
]

display(pd.DataFrame(data=[cfg["components"][0]["solder_ball_properties"]]))

	shape	diameter	mid_diameter	height
0	spheroid	244um	400um	300um

display(pd.DataFrame(data=[cfg["components"][0]["port_properties"]]))

	reference_offset	reference_size_auto	reference_size_x	reference_size_y
0	0.1mm	True	0	0

display(pd.DataFrame(data=cfg["components"][1]["pin_pair_model"]))

	first_pin	second_pin	is_parallel	resistance	resistance_enabled	inductance	inductance_enabled	capacitance	capacitance_enabled
0	1	2	False	10ohm	True	1nH	False	10nF	True

cfg_file_path = Path(temp_folder) / "cfg.json"
with open(cfg_file_path, "w") as f:
    json.dump(cfg, f, indent=4, ensure_ascii=False)

Load config file

edbapp.configuration.load(cfg_file_path, apply_file=True)

<pyedb.configuration.cfg_data.CfgData at 0x195a58f7ba0>

Save and close Edb

The temporary folder will be deleted once the execution of this script is finished. Replace edbapp.save() with edbapp.save_as(“C:/example.aedb”) to keep the example project.

edbapp.save()
edbapp.close()

True