EDB: geometry creation#

This example shows how to 1. Create a parameterized PCB with an SMA connector footprint for a single-ended SMA connector launch footprint.. 2. Place 3D component on PCB. 3. Create HFSS setup and frequency sweep with a mesh operation. 4. Create return loss plot

See the finished project#

017f3231c09f48f6a901768b16447524

Create a parameterized PCB#

Import dependencies.

[1]:

import os
import tempfile

[2]:

import ansys.aedt.core
import numpy as np

[3]:

import pyedb
from pyedb.misc.downloads import download_file

Create the EDB.

[4]:

temp_dir = tempfile.TemporaryDirectory(suffix=".ansys")
working_folder = temp_dir.name

# Select EDB version (change it manually if needed, e.g. "2024.2")
edb_version = "2024.2"
print(f"EDB version: {edb_version}")

aedb_path = os.path.join(working_folder, "pcb.aedb")
print("AEDB file is located in {}".format(aedb_path))

edb = pyedb.Edb(edbpath=aedb_path, edbversion=edb_version)

EDB version: 2024.2
AEDB file is located in C:\Users\ansys\AppData\Local\Temp\tmpcbygw8ku.ansys\pcb.aedb
PyAEDT INFO: Logger is initialized in EDB.
PyAEDT INFO: legacy v0.34.3
PyAEDT INFO: Python version 3.10.11 (tags/v3.10.11:7d4cc5a, Apr  5 2023, 00:38:17) [MSC v.1929 64 bit (AMD64)]
PyAEDT INFO: EDB C:\Users\ansys\AppData\Local\Temp\tmpcbygw8ku.ansys\pcb.aedb created correctly.
PyAEDT INFO: EDB initialized.

Create Stackup#

While this code explicitly defines the stackup, you can import it from a from a CSV or XML file using the Edb.stackup.load() method.

[5]:

edb.add_design_variable("$DIEL_T", "0.15mm")

[5]:

(True, <Ansys.Ansoft.Edb.Utility.VariableServer object at 0x00000252A503B7C0>)

[6]:

layers = {
    "materials": {"ANSYS_FR4": {"permittivity": 3.5, "dielectric_loss_tangent": 0.005}},
    "layers": {
        "TOP": {"type": "signal", "thickness": "0.05"},
        "D1": {"type": "dielectric", "thickness": "$DIEL_T", "material": "ANSYS_FR4"},
        "L2": {"type": "signal", "thickness": "0.05"},
        "D2": {"type": "dielectric", "thickness": "$DIEL_T", "material": "ANSYS_FR4"},
        "L3": {"type": "signal", "thickness": "0.05"},
        "D3": {"type": "dielectric", "thickness": "$DIEL_T", "material": "ANSYS_FR4"},
        "L4": {"type": "signal", "thickness": "0.05"},
        "D4": {"type": "dielectric", "thickness": "$DIEL_T", "material": "ANSYS_FR4"},
        "L5": {"type": "signal", "thickness": "0.05"},
        "D5": {"type": "dielectric", "thickness": "$DIEL_T", "material": "ANSYS_FR4"},
        "BOT": {"type": "signal", "thickness": "0.035"},
    },
}

[7]:

edb.stackup.load(layers)

[7]:

True

Create ground conductors.

[8]:

edb.add_design_variable("PCB_W", "20mm")
edb.add_design_variable("PCB_L", "20mm")

gnd_dict = {}
for layer_name in edb.stackup.signal_layers.keys():
    gnd_dict[layer_name] = edb.modeler.create_rectangle(layer_name, "GND", [0, "PCB_W/-2"], ["PCB_L", "PCB_W/2"])

Create signal net#

Create signal net on layer 3, and add clearance to the ground plane.

[9]:

edb.add_design_variable("SIG_L", "10mm")
edb.add_design_variable("SIG_W", "0.1mm")
edb.add_design_variable("SIG_C", "0.3mm")

signal_path = (["5mm", 0], ["SIG_L+5mm", 0])
signal_trace = edb.modeler.create_trace(signal_path, "L3", "SIG_W", "SIG", "Flat", "Flat")

signal_path = (["5mm", 0], ["PCB_L", 0])
clr = edb.modeler.create_trace(signal_path, "L3", "SIG_C*2+SIG_W", "SIG", "Flat", "Flat")
gnd_dict["L3"].add_void(clr)

[9]:

True

Place signal vias#

Create the via padstack definition and place the signal vias.

[10]:

edb.add_design_variable("SG_VIA_D", "1mm")
edb.add_design_variable("$VIA_AP_D", "1.2mm")
edb.padstacks.create("ANSYS_VIA", "0.3mm", "0.5mm", "$VIA_AP_D")
edb.padstacks.place(["5mm", 0], "ANSYS_VIA", "SIG")

PyAEDT INFO: Padstack ANSYS_VIA create correctly

[10]:

<pyedb.dotnet.edb_core.edb_data.padstacks_data.EDBPadstackInstance at 0x252a4fc3700>

Create ground vias around the SMA connector launch footprint. The vias are placed around the circumference of the launch from 35 degrees to 325 degrees.

[11]:

for i in np.arange(30, 326, 35):
    px = np.cos(i / 180 * np.pi)
    py = np.sin(i / 180 * np.pi)
    edb.padstacks.place(["{}*{}+5mm".format("SG_VIA_D", px), "{}*{}".format("SG_VIA_D", py)], "ANSYS_VIA", "GND")

Create ground vias along the signal trace.

[12]:

for i in np.arange(2e-3, edb.variables["SIG_L"].value - 2e-3, 2e-3):
    edb.padstacks.place(["{}+5mm".format(i), "1mm"], "ANSYS_VIA", "GND")
    edb.padstacks.place(["{}+5mm".format(i), "-1mm"], "ANSYS_VIA", "GND")

Create a wave port at the end of the signal trace.

[13]:

signal_trace.create_edge_port("port_1", "End", "Wave", horizontal_extent_factor=10)

[13]:

('port_1', <pyedb.dotnet.edb_core.edb_data.ports.WavePort at 0x252a5014940>)

Set up HFSS simulation#

The max_num_passes argument sets an upper limit on the number of adaptive passes for mesh refinement.

For broadband applications when the simulation results may be used to generate a SPICE model, the outer domain boundary can be located roughly

\[d=\lambda/8\]

from the internal structures in the model.

[14]:

extend_domain = 3e11 / 5e9 / 8.0  # Quarter wavelength at 4 GHz.
edb.design_options.antipads_always_on = True
edb.hfss.hfss_extent_info.air_box_horizontal_extent = extend_domain
edb.hfss.hfss_extent_info.air_box_positive_vertical_extent = extend_domain
edb.hfss.hfss_extent_info.air_box_negative_vertical_extent = extend_domain

setup = edb.create_hfss_setup("Setup1")
setup.set_solution_single_frequency("5GHz", max_num_passes=8, max_delta_s="0.02")
setup.hfss_solver_settings.order_basis = "first"

Add a mesh operation to the setup.

[15]:

edb.setups["Setup1"].add_length_mesh_operation({"SIG": ["L3"]}, "m1", max_length="0.1mm")

[15]:

<pyedb.dotnet.edb_core.sim_setup_data.data.mesh_operation.LengthMeshOperation at 0x252ff2ddf60>

Add a frequency sweep to setup.

When the simulation results are to be used for transient SPICE analysis, you should use the following strategy:

  • DC point

  • Logarithmic sweep from 1 kHz to 100 MHz

  • Linear scale for higher frequencies.

[16]:

setup.add_frequency_sweep(
    "Sweep1",
    frequency_sweep=[
        ["linear count", "0", "1KHz", 1],
        ["log scale", "1KHz", "100MHz", 10],
        ["linear scale", "0.1GHz", "5GHz", "0.1GHz"],
    ],
)

[16]:

<pyedb.dotnet.edb_core.sim_setup_data.data.sweep_data.SweepData at 0x252a5080e20>

Save and close EDB.

[17]:

edb.save_edb()
edb.close_edb()

PyAEDT INFO: EDB file save time: 0.00ms
PyAEDT INFO: EDB file release time: 15.62ms

[17]:

True

Launch HFSS 3D Layout.

[18]:

h3d = ansys.aedt.core.Hfss3dLayout(aedb_path, specified_version=edb_version, new_desktop_session=True)

PyAEDT WARNING: Argument `specified_version` is deprecated for method `__init__`; use `version` instead.
PyAEDT WARNING: Argument `new_desktop_session` is deprecated for method `__init__`; use `new_desktop` instead.
PyAEDT INFO: Python version 3.10.11 (tags/v3.10.11:7d4cc5a, Apr  5 2023, 00:38:17) [MSC v.1929 64 bit (AMD64)]
PyAEDT INFO: PyAEDT version 0.12.dev0.
PyAEDT INFO: Initializing new Desktop session.
PyAEDT INFO: Log on console is enabled.
PyAEDT INFO: Log on file C:\Users\ansys\AppData\Local\Temp\pyaedt_ansys_37b3ae87-3fa5-47cf-9626-06a0440e73f0.log is enabled.
PyAEDT INFO: Log on AEDT is enabled.
PyAEDT INFO: Debug logger is disabled. PyAEDT methods will not be logged.
PyAEDT INFO: Launching PyAEDT with gRPC plugin.
PyAEDT INFO: New AEDT session is starting on gRPC port 57331
PyAEDT INFO: AEDT installation Path C:\Program Files\AnsysEM\v242\Win64
PyAEDT INFO: Ansoft.ElectronicsDesktop.2024.2 version started with process ID 9188.
PyAEDT INFO: EDB folder C:\Users\ansys\AppData\Local\Temp\tmpcbygw8ku.ansys\pcb.aedb has been imported to project pcb
PyAEDT INFO: Active Design set to 0;Cell_397W0O
PyAEDT INFO: Aedt Objects correctly read

Place a 3D component.

[19]:

full_comp_name = download_file("component_3d", filename="SMA_RF_SURFACE_MOUNT.a3dcomp", destination=working_folder)
comp = h3d.modeler.place_3d_component(
    component_path=full_comp_name,
    number_of_terminals=1,
    placement_layer="TOP",
    component_name="my_connector",
    pos_x="5mm",
    pos_y=0.000,
)

PyAEDT INFO: Loading Modeler.
PyAEDT INFO: Modeler loaded.
PyAEDT INFO: EDB loaded.
PyAEDT INFO: Layers loaded.
PyAEDT INFO: Primitives loaded.
PyAEDT INFO: Modeler class has been initialized! Elapsed time: 0m 0sec

Run simulation#

[20]:

h3d.analyze(num_cores=4)

PyAEDT WARNING: Argument `num_cores` is deprecated for method `analyze`; use `cores` instead.
PyAEDT INFO: Key Desktop/ActiveDSOConfigurations/HFSS 3D Layout Design correctly changed.
PyAEDT INFO: Solving all design setups.
PyAEDT INFO: Key Desktop/ActiveDSOConfigurations/HFSS 3D Layout Design correctly changed.
PyAEDT INFO: Design setup None solved correctly in 0.0h 1.0m 14.0s

[20]:

True

Visualize the return loss.#

[21]:

h3d.post.create_report("dB(S(port_1, port_1))")

PyAEDT INFO: Parsing C:/Users/ansys/AppData/Local/Temp/tmpcbygw8ku.ansys/pcb.aedt.
PyAEDT INFO: File C:/Users/ansys/AppData/Local/Temp/tmpcbygw8ku.ansys/pcb.aedt correctly loaded. Elapsed time: 0m 0sec
PyAEDT INFO: aedt file load time 0.015631437301635742
PyAEDT INFO: PostProcessor class has been initialized! Elapsed time: 0m 0sec
PyAEDT INFO: Post class has been initialized! Elapsed time: 0m 0sec

[21]:

<ansys.aedt.core.visualization.report.standard.Standard at 0x252ab0af490>

Save and close the project.#

[22]:

h3d.save_project()
print("Project is saved to {}".format(h3d.project_path))
h3d.release_desktop(True, True)

PyAEDT INFO: Project pcb Saved correctly
Project is saved to C:/Users/ansys/AppData/Local/Temp/tmpcbygw8ku.ansys/
PyAEDT INFO: Desktop has been released and closed.

[22]:

True

Clean up the temporary folder.#

[23]:

temp_dir.cleanup()
On this page
Edit on GitHub
Show Source