Import Sources

This example shows how to import voltage and current sources. In this example, we are going to

• Download an example board

• Create a configuration file

  • Add a voltage source between two nets

  • Add a current source between two pins

  • Add a current source between two pin groups

  • Add a current source between two coordinates

  • Add a current source to the nearest pin

  • Add distributed sources

• Import the configuration file

Import the required packages

import json
from pathlib import Path
import tempfile

from ansys.aedt.core.downloads import download_file

from pyedb import Edb

AEDT_VERSION = "2024.2"
NG_MODE = False

Download the example PCB data.

temp_folder = tempfile.TemporaryDirectory(suffix=".ansys")
file_edb = download_file(source="edb/ANSYS-HSD_V1.aedb", destination=temp_folder.name)

Load example layout

edbapp = Edb(file_edb, edbversion=AEDT_VERSION)

PyAEDT INFO: Logger is initialized in EDB.
PyAEDT INFO: legacy v0.35.dev0
PyAEDT INFO: Python version 3.10.11 (tags/v3.10.11:7d4cc5a, Apr  5 2023, 00:38:17) [MSC v.1929 64 bit (AMD64)]
PyAEDT INFO: Database ANSYS-HSD_V1.aedb Opened in 2024.2
PyAEDT INFO: Cell main Opened
PyAEDT INFO: Builder was initialized.
PyAEDT INFO: EDB initialized.

Create an empty dictionary to host all configurations

cfg = dict()

Add a voltage source between two nets

Keywords

• name. Name of the voltage source.

• Reference_designator. Reference designator of the component.

• type. Type of the source. Supported types are ‘voltage’, ‘current’

• positive_terminal. Supported types are ‘net’, ‘pin’, ‘pin_group’, ‘coordinates’

• negative_terminal. Supported types are ‘net’, ‘pin’, ‘pin_group’, ‘coordinates’, ‘nearest_pin’

voltage_source = {
    "name": "V_SOURCE_5V",
    "reference_designator": "U4",
    "type": "voltage",
    "magnitude": 1,
    "positive_terminal": {"net": "5V"},
    "negative_terminal": {"net": "GND"},
}

Add a current source between two pins

current_source_1 = {
    "name": "I_CURRENT_1A",
    "reference_designator": "J5",
    "type": "current",
    "magnitude": 10,
    "positive_terminal": {"pin": "15"},
    "negative_terminal": {"pin": "14"},
}

Add a current source between two pin groups

pin_groups = [
    {"name": "IC2_5V", "reference_designator": "IC2", "pins": ["8"]},
    {"name": "IC2_GND", "reference_designator": "IC2", "net": "GND"},
]

current_source_2 = {
    "name": "CURRENT_SOURCE_2",
    "type": "current",
    "positive_terminal": {"pin_group": "IC2_5V"},
    "negative_terminal": {"pin_group": "IC2_GND"},
}

Add a current source between two coordinates

Keywords

• layer. Layer on which the terminal is placed

• point. XY coordinate the terminal is placed

• net. Name of the net the terminal is placed on

current_source_3 = {
    "name": "CURRENT_SOURCE_3",
    "type": "current",
    "positive_terminal": {"coordinates": {"layer": "1_Top", "point": ["116mm", "41mm"], "net": "5V"}},
    "negative_terminal": {"coordinates": {"layer": "Inner1(GND1)", "point": ["116mm", "41mm"], "net": "GND"}},
}

Add a current source reference to the nearest pin

Keywords

• reference_net. Name of the reference net

• search_radius. Reference pin search radius in meter

current_source_4 = {
    "name": "CURRENT_SOURCE_4",
    "reference_designator": "J5",
    "type": "current",
    "positive_terminal": {"pin": "16"},
    "negative_terminal": {"nearest_pin": {"reference_net": "GND", "search_radius": 5e-3}},
}

Add distributed current sources

Keywords

• distributed. Whether to create distributed sources. When set to True, ports are created per pin

sources_distributed = {
    "name": "DISTRIBUTED",
    "reference_designator": "U2",
    "type": "current",
    "distributed": True,
    "positive_terminal": {"net": "5V"},
    "negative_terminal": {"net": "GND"},
}

Add setups in configuration

cfg["pin_groups"] = pin_groups
cfg["sources"] = [
    voltage_source,
    current_source_1,
    current_source_2,
    current_source_3,
    current_source_4,
    sources_distributed,
]

Write configuration into as json file

file_json = Path(temp_folder.name) / "edb_configuration.json"
with open(file_json, "w") as f:
    json.dump(cfg, f, indent=4, ensure_ascii=False)

Import configuration into example layout

edbapp.configuration.load(config_file=file_json)
edbapp.configuration.run()

True

Review

edbapp.siwave.sources

{'V_SOURCE_5V': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe7c130>,
 'I_CURRENT_1A': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe7c0a0>,
 'CURRENT_SOURCE_2': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1af17f0bdc0>,
 'CURRENT_SOURCE_3': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efc104fd60>,
 'CURRENT_SOURCE_4': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1af17f083a0>,
 'DISTRIBUTED_U2_5V_39': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe049d0>,
 'DISTRIBUTED_U2_5V_40': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe056c0>,
 'DISTRIBUTED_U2_5V_41': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe04be0>,
 'DISTRIBUTED_U2_5V_42': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe04df0>,
 'DISTRIBUTED_U2_5V_43': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe04a60>,
 'DISTRIBUTED_U2_5V_44': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe05990>,
 'DISTRIBUTED_U2_5V_45': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe05180>,
 'DISTRIBUTED_U2_5V_46': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe05a80>,
 'DISTRIBUTED_U2_5V_47': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe05960>,
 'DISTRIBUTED_U2_5V_48': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe05ba0>,
 'DISTRIBUTED_U2_5V_49': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe05d20>,
 'DISTRIBUTED_U2_5V_50': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe043a0>,
 'DISTRIBUTED_U2_5V_51': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe044f0>,
 'DISTRIBUTED_U2_5V_60': <pyedb.dotnet.edb_core.edb_data.ports.ExcitationSources at 0x1efbfe04340>}

Save and close Edb

The temporary folder will be deleted once the execution of this script is finished. Replace edbapp.save() with edbapp.save_as(“C:/example.aedb”) to keep the example project.

edbapp.save()
edbapp.close()

True