RaptorXAdvancedSettings

class pyedb.grpc.database.simulation_setup.raptor_x_advanced_settings.RaptorXAdvancedSettings(pedb, core: ansys.edb.core.simulation_setup.raptor_x_simulation_settings.RaptorXAdvancedSettings)

Raptor X advanced settings class.

Overview

Properties

advanced_options	Get advanced options as a dictionary.
auto_removal_sliver_poly	Automatic sliver polygon removal tolerance.
cell_per_wave_length	Number of cells that fit under each wavelength.
cells_per_wavelength	Number of cells that fit under each wavelength.
edge_mesh	Thickness and width of the exterior conductor filament.
eliminate_slit_per_hole	Threshold for strain or thermal relief slits and hole polygon areas.
eliminate_slit_per_holes	Threshold for strain or thermal relief slits and hole polygon areas.
mesh_frequency	Frequency at which the mesh is generated.
net_settings_options	Get net settings options as a dictionary.
override_shrink_fac	Override shrink factor for polygon edges.
override_shrink_factor	Override shrink factor for polygon edges.
plane_projection_factor	Plane projection factor for reducing the mesh complexity of large metal planes.
use_accelerate_via_extraction	Flag indicating if neighboring vias are simplified/merged.
use_auto_removal_sliver_poly	Flag indicating if slight misaligned overlapping polygons are to be automatically aligned.
use_cells_per_wavelength	Flag indicating if cells per wavelength are used.
use_edge_mesh	Flag indicating if edge mesh is used.
use_eliminate_slit_per_holes	Flag indicating if elimination of slits and holes is used.
use_enable_advanced_cap_effects	Flag indicating if capacitance-related effects such as conformal dielectrics are applied.
use_enable_etch_transform	Flag indicating if layout is “pre-distorted” based on foundry rules.
defuse_enable_hybrid_extraction	Flag indicating if the modeler is to split the layout into two parts in an attempt to decrease
use_enable_substrate_network_extraction	Flag indicating if modeling of substrate coupling effects is enabled using equivalent distributed RC
use_extract_floating_metals_dummy	Flag indicating if floating metals are modeled as dummy fills.
use_extract_floating_metals_floating	Flag indicating if floating metals are modeled as floating nets.
use_lde	Flag indicating if variations in resistivity are taken into account.
use_mesh_frequency	Flag indicating if mesh frequency is used.
use_override_shrink_fac	Flag indicating if override shrink factor is used.
use_override_shrink_factor	Flag indicating if override shrink factor is used.
use_plane_projection_factor	Flag indicating if plane projection factor is used.
use_relaxed_z_axis	Flag indicating if simplified meshing is used along the z axis.

Attributes

core

Import detail

from pyedb.grpc.database.simulation_setup.raptor_x_advanced_settings import RaptorXAdvancedSettings

Property detail

property RaptorXAdvancedSettings.advanced_options: dict[str, list[str]]

Get advanced options as a dictionary.

property RaptorXAdvancedSettings.auto_removal_sliver_poly: float

Automatic sliver polygon removal tolerance.

property RaptorXAdvancedSettings.cell_per_wave_length

Number of cells that fit under each wavelength.

Deprecated since version 0.70.0: Use cells_per_wavelength instead.

property RaptorXAdvancedSettings.cells_per_wavelength: int

Number of cells that fit under each wavelength.

Returns:

int

Number of cells per wavelength.

property RaptorXAdvancedSettings.edge_mesh: float

Thickness and width of the exterior conductor filament.

property RaptorXAdvancedSettings.eliminate_slit_per_hole

Threshold for strain or thermal relief slits and hole polygon areas.

Deprecated since version 0.70.0: Use eliminate_slit_per_holes instead.

property RaptorXAdvancedSettings.eliminate_slit_per_holes: float

Threshold for strain or thermal relief slits and hole polygon areas.

property RaptorXAdvancedSettings.mesh_frequency: float

Frequency at which the mesh is generated.

property RaptorXAdvancedSettings.net_settings_options: dict[str, list[str]]

Get net settings options as a dictionary.

property RaptorXAdvancedSettings.override_shrink_fac

Override shrink factor for polygon edges.

Deprecated since version 0.70.0: Use override_shrink_factor instead.

property RaptorXAdvancedSettings.override_shrink_factor: float

Override shrink factor for polygon edges.

property RaptorXAdvancedSettings.plane_projection_factor: float

Plane projection factor for reducing the mesh complexity of large metal planes.

property RaptorXAdvancedSettings.use_accelerate_via_extraction: bool

Flag indicating if neighboring vias are simplified/merged.

property RaptorXAdvancedSettings.use_auto_removal_sliver_poly: bool

Flag indicating if slight misaligned overlapping polygons are to be automatically aligned.

property RaptorXAdvancedSettings.use_cells_per_wavelength: bool

Flag indicating if cells per wavelength are used.

property RaptorXAdvancedSettings.use_edge_mesh: bool

Flag indicating if edge mesh is used.

property RaptorXAdvancedSettings.use_eliminate_slit_per_holes: bool

Flag indicating if elimination of slits and holes is used.

property RaptorXAdvancedSettings.use_enable_advanced_cap_effects: bool

Flag indicating if capacitance-related effects such as conformal dielectrics are applied.

property RaptorXAdvancedSettings.use_enable_etch_transform: bool

Flag indicating if layout is “pre-distorted” based on foundry rules.

property RaptorXAdvancedSettings.defuse_enable_hybrid_extraction: bool

Flag indicating if the modeler is to split the layout into two parts in an attempt to decrease the complexity.

property RaptorXAdvancedSettings.use_enable_substrate_network_extraction: bool

Flag indicating if modeling of substrate coupling effects is enabled using equivalent distributed RC networks.

property RaptorXAdvancedSettings.use_extract_floating_metals_dummy: bool

Flag indicating if floating metals are modeled as dummy fills.

property RaptorXAdvancedSettings.use_extract_floating_metals_floating: bool

Flag indicating if floating metals are modeled as floating nets.

property RaptorXAdvancedSettings.use_lde: bool

Flag indicating if variations in resistivity are taken into account.

property RaptorXAdvancedSettings.use_mesh_frequency: bool

Flag indicating if mesh frequency is used.

property RaptorXAdvancedSettings.use_override_shrink_fac

Flag indicating if override shrink factor is used.

Deprecated since version 0.70.0: Use use_override_shrink_factor instead.

property RaptorXAdvancedSettings.use_override_shrink_factor: bool

Flag indicating if override shrink factor is used.

property RaptorXAdvancedSettings.use_plane_projection_factor: bool

Flag indicating if plane projection factor is used.

property RaptorXAdvancedSettings.use_relaxed_z_axis: bool

Flag indicating if simplified meshing is used along the z axis.

Attribute detail

RaptorXAdvancedSettings.core